DAF Air Water Releaser

Product Detail

The main technical parameters and dimensions:

Model number	Specification	Inlet   diameter of high algae	Diameter   of blank pipe	Flux under different pressures(m^3/h)					Functional diameter(mm)
TJ-2.5	8*1/2”	1”	1/2”	2.37	2.59	2.81	2.97	3.14	600
TJ-5	8*1”	2”	1/2”	4.61	5.51	5.60	5.98	6.31	1000
TJ-10	8*1/2”	3”	1/2”	8.70	9.47	10.56	11.11	11.75	1200

 Dissloved air releaser is a key device in air flotation system .Dissolved water can only release large sum of micro--bubble thus decides water treatment efffect ,It can be backwashed and won’t block. It is usually used in  pure water process.


There is a liftable tongue in the TJ type dissolving gas dispenser. In normal operation, the reed uses the pump pressure (through the ejector and vacuum tube) in the working position.

The TJ type release is improved based on the TS type. it is not easy to plug in the back flushing. There is a reed inside. When working normally, the reed is in the working position. If the release is blocked by impurity in the water, the gate after the water emitter can be opened to make the water emitter work. At this point, the negative pressure will be generated in the vacuum tube, and the reed will be pulled up. Therefore, the channel of the water flow is increased, and the impurity is discharged and the gate is closed. That is, the reed can be reset and the normal work will be performed.